100% Original Launch CNC602A Injector Cleaner & Tester with English Panel.
Launch CNC-602A Injector Cleaner & Tester :
Original 220V CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
Function:
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test: To test injectors by simulating different working conditions.
* On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Specification: * Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 109990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm;
* Weight: About 30kg
Support Model:
for Audi, for Australia Ford, for Benz, for BMW, for Brilliance, for Chevrolet, for Chevy, for Chrysler, for Citroen, for Dacia, for Dadi, for Daewoo, for Daihatsu,Demo, for Fiat, for Ford, for GM, for Holden,for Honda, for Hyundai, for Isuzu, for Jaguar, for Kia, for Lancia, for Land Rover, for Mahindra, for Maruti, for Mazda, for Mitsubish, for Nissan, for Opel, for Peugeot, for Porsche, for Renault, for Romeo, for Rover, for Saab, for Seat, for Skoda,for Smart, for Subaru, for Suzuki, for Tata, for Toyota, for Volvo, for VW, for Yamaha
Launch CNC-602A Injector & Cleaner Tester Packing List:
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 FOR B-UICK injector adaptor
11 199010019 Injector testing liquid (pick out)
12 307030024 Injecter detergent (pick out)
Reviews
There are no reviews yet.